DITEK SURGE PROTECTION


A power surge is a brief, powerful blast of electricity caused by a change in power. Sometimes referred to
as over-voltage, a power surge happens in a fraction of a second.

A power surge can be caused by lightning. And in the United States, lightning will strike more than 60 times a year in any given neighborhood. A nearby strike can produce a power surge that can travel in the ground for
miles. So when thunderstorms roll into your area, power surges may not be far behind them.

But lightning is not the only culprit. Powers surges can also be caused by something as innocent as a
coffee pot cycling on. Air conditioners, motors, even generators in your neighborhood as well as squirrels running across power lines can produce surges that can damage or destroy your home electronics...Now, you can be protected from these type of power surges by having surge protection installed in your home.

What's At Risk!

TVs. VCRs. Telephones. Sound systems and DVD players... For these, and every other electronic product in your home, a power surge can be a natural enemy. For your computer,
a power surge is a predator, capable of destroying sensitive electronics in less than one second. That's why insurance companies, electrical engineers and safety consultants recommend surge protection for your home.

While a direct lightning strike poses considerable danger to your home electronics, lightning doesn't have to strike close by to be damaging. Only a lightning strike about mile from your front door can send power surges into your walls and outlets threatening the life of your electronics. But with surge protection in your home,
99% of all power surges can be rendered harmless.

Appliances aren't safe either. Most homes have 30 or more motor driven appliances, like a microwave oven, a refrigerator, or a washer and dryer. While these appliances may seem like they are operating fine, over time, repeated surges can wear them down reducing their lifespan until they stop dead. But with the surge protection system, motors can last longer, protecting your investment and your valuable household electronics and appliances.

Think you are safe at home during an electrical storm?

Maybe. But what about your T.V. or your computer? Unless your home is protected with a DITEK Stormshield 2000 system, a power surge could burn up your big screen, destroy your DVD player and hard drive in the blink of an eye.

Unlike other surge protectors, the Stormsheild system is permanent defense for power surges of all types. UL certified and superbly engineered, Stormshield is designed to arrest power surges at or near the point where electric power, telephone and cable or satellite TV services enter your home - protecting all three utilities, and all inside outlets from allowing a surge access to your home electronics.

1fcsm.jpg - 4014 Bytes 1FCSM :
Price $73.99

Physical Specifications:
Product Description: Single outlet wall mount with coaxial protection
Housing: High impact plastic Color Black
Size: 2.69 in. x 1.83 in. x 1.25 in. Weight 0.250
Electrical Specifications:
Class: Single outlet wall mount with coaxial protection
Installation Point: Receptacle
Connection Method: Plug in
Continuous Current: Unlimited
Response Time: 1nSec
MCOV: 130VAC (Power)
Operating Frequency: 50/60Hz
AC Protection Modes: L- N, L- G, N- G (power) Center pin shield, Shield - Ground
Service Voltage: 110VAC (Power) 75VDC (Center Pin to Shield) 8VDC (Shield to Ground)
Diagnostics: Indicator Light - Surge Protection present
Max Surge Current: 13,500 Amps (Power) 250 Amps (Coax)
Max Energy Dissipation: 114 Joules (Power) 1.2 Joules (Coax)
Suppressed Voltage Rating: 330V

1ffsm.jpg - 3642 Bytes1FFSM :
Price $72.99

Physical Specifications:
Product Description: Single outlet wall mount with telephone protection
Housing: High impact plastic Color Gray
Size:2.69 in. x 1.83 in. x 1.25 in. Weight 0.250
Electrical Specifications:
Class: Single outlet wall mount with telephone protection
Installation Point: Receptacle
Agency Approvals: UL 1449, cUL, UL 497A
Connection Method: Plug-in
Continuous Current: 15 Amps
Response Time: 5 nSec
MCOV: 130VRMS
Operating Frequency: 50/60Hz
AC Protection Modes: L - N, L - G, N - G
Service Voltage: 110VAC
Diagnostics: Indicator Light - Surge Protection present
Max Surge Current: 13,500 Amps A/C, 2,400 Amps Telephone
Max Energy Dissipation: 114 Joules (A/C) 22 Joules (Telephone)
Suppressed Voltage Rating: 330V

1fsm.jpg - 3343 Bytes 1FSM :
Price $25.99

Physical Specifications:
Product Description: Single outlet wall mount
Housing: High impact plastic Color White
Size: 2.69 in. x 1.83 in. x 1.25 in. Weight 0.200
Electrical Specifications
Class: Single outlet wall mount
Installation Point: Receptacle
Agency Approvals: UL 1449, cUL
Connection Method: Plug-in Continuous
Current: 15 Amps Response Time:
Response Time: 1nSec
MCOV: 130 VAC
Operating Frequency: 50/60Hz
AC Protection Modes: L - N, L - G, N - G
Service Voltage: 110VAC
Diagnostics: Light on - power and surge protection active
Max Surge Current: 13,500 Amps
Max Energy Dissipation: 114 Joules
Suppressed Voltage Rating: 330V

1psm.jpg - 4785 Bytes 1PSM :
Physical Specifications:
Product Description:
Housing: High impact plastic Color Gray
Size: 2.0 in. x 2.0 in. x .75 in. Weight 0.150
Electrical Specifications:
Class: Telephone line protector
Installation Point: 66 block punch down at point of use
Agency Approvals: UL497B
Connection Method: Punchdown on M150 (66 block)
Continuous Current: Unlimited
Response Time: 5 nSec
MCOV: 8VDC
Max Surge Current: 500A per pair
Max Energy Dissipation: 1.2 Joules per pair
Typical Let Through Voltage: 9.0 - 16.0 (per pair)

VSPASM.gif - 3355 Bytes VSPASM:
Physical Specifications:
Product Description: Video Line Coax (F Connector) (CATV)
Housing: High Impact Plastic Color Black Size: 3.25 in. x 1.25 in. x 1.00 in. Weight 0.150
Electrical Specifications:
Class: Coaxial Cable Protector
Installation Point: CATV Entry
Connection Method: Female IN/OUT
Response Time: 5nSec
MCOV: 75VDC (center pin-shield), 38 VDC (shield-ground)
Impedance: 75 Ohms
Standing Wave Ratio: 1.2:1
Band Pass: 0-1.5 GHz
Insertion Loss: 0.3dB @ .3 KHz - 1.1 MHz; -3.0dB loss @ 3.0 - 4.

Wire ExcellenceHOME
Please send any comments regarding this site to: Wire Excellence
This page, and its contents ©2012, by Wire Excellence Security. All rights reserved.